Winkelwagen - € 0,00

U heeft geen items in uw winkelwagen.

Terug naar vorige pagina

Moxa 5150A-T RS-232/422/485 seriële server (NPort 5150A-T)

Schrijf de eerste review over dit product en win een coupon van € 100,-!

€ 187,00
excl. BTW

NPort 5150A-T

EAN: NPort 5150A-T Beschikbaarheid: Ruim op voorraad

RJ45, 10/100 Mbps, RS-232/422/485, auto MDI/MDIX

Bestel Nu >>
Toon in vergelijking
Toevoegen aan favorieten


Moxa 5150A-T. Ingangsspanning: 12 - 48. Ondersteunde netwerkprotocollen: ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2, ARP. Afmetingen (BxDxH): 52 x 80 x 22 mm. Kleur van het product: Zwart, Blauw, Materiaal behuizing: Metaal, Veiligheid: UL 60950-1

The NPort® 5100A device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort® 5100A device servers are ultra lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.

A Greener Serial-to-Ethernet Solution
The Moxa MiiNe is a small but powerful ARM-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe inside, the NPort® 5110A series becomes the world’s only device server with power consumption less than 1 W. The NPort® 5100A series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today’s industrial environments.

Surge-protected Serial, Ethernet, and Power Lines
Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort® 5100A’s serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.

3-step Web-based Configuration
The NPort® 5100A’s 3-step web-based configuration tool is straightforward and user-friendly. The NPort® 5100A’s web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort® settings and enable the application, saving a great amount of time and effort.

Easy to Troubleshoot
NPort® 5100A device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an e-mail alert can be sent instead. Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a password change.


Materiaal behuizing Metaal
Kleur van het product Zwart, Blauw

Technische details

RS-232 signalen CTS,DCD,DSR,DTR,GND,RTS,Rx,Tx
Datastroombeheer Ja
Seriële poort(en) 1
Isolatie 1,5 kV
Ethernet LAN, data-overdrachtsnelheden 10,100 Mbit/s
Soort serieële aansluiting RS-232/422/485
RS-422 signalen GND,RxD+,RxD-,TxD+,TxD-
RS-485 signalen Data+,Data-,GND,RxD+,RxD-,TxD+,TxD-
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
Mean time between failures (MTBF) 2231530 uur
Flow Control type RTS/CTS,XON/XOFF


Veiligheid UL 60950-1

Gewicht en omvang

Afmetingen (BxDxH) 52 x 80 x 22 mm
Gewicht 340 g


Ingangsspanning 12 - 48

Eisen aan de omgeving

Luchtvochtigheid bij opslag 5 - 95 procent
Temperatuur bij opslag -40 - 75 °C
Temperatuur, in bedrijf -40 - 75 °C


Ondersteunde netwerkprotocollen ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2, ARP

Schrijf uw eigen review

Alleen geregistreerde klanten van kunnen een review schrijven. U kunt zich hier inloggen of uzelf als klant registreren.