Winkelwagen - € 0,00

U heeft geen items in uw winkelwagen.

Terug naar vorige pagina

Moxa 5230A (NPORT 5230A)

Schrijf de eerste review over dit product en win een coupon van € 100,-!

€ 185,00
excl. BTW
Partnummer:

NPORT 5230A

EAN: NPORT 5230A Beschikbaarheid: Nog 1 beschikbaar (bel voor reservering)
Omschrijving

RJ45, 10/100 Mbps, RS-422/485 x 2, auto MDI/MDIX

Bestel Nu >>
Toon in vergelijking
Toevoegen aan favorieten

Details

Moxa 5230A. Bekabelingstechnologie: 10/100Base-T(X). Ingangsspanning: 12 - 48. Ondersteunde netwerkprotocollen: ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2, ARP. Afmetingen (BxDxH): 77 x 111 x 26 mm, Gewicht: 340 g. Kleur van het product: Zwart, Materiaal behuizing: Metaal, Veiligheid: UL 60950-1

The NPort® 5200A device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort® 5200A device servers are ultra lean, ruggedized, and user friendly, making simple and reliable serial to Ethernet solutions possible.

A Greener Serial-to-Ethernet Solution
The Moxa MiiNe is a small but powerful ARM-based serial-to-Ethernet SoC with RAM and Flash embedded. The NPort® 5200A series saves at least 50% on power consumption compared to existing solutions on the market, helping engineers meet the tough environmental compliance challenges found in today’s industrial environments.

Surge-protected Serial, Ethernet, and Power Lines
Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort® 5200A’s serial, power, and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This state-of-the-art surge protection provides a robust serial-to-Ethernet solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.

3-step Web-based Configuration
The NPort® 5200A’s 3-step web-based configuration tool is straightforward and user-friendly. The NPort® 5200A’s web console guides users through 3 simple configuration steps that are necessary to activate the serial-to-Ethernet application. With this speedy 3-step web-based configuration, a user only needs to spend an average of 30 seconds to complete the NPort® settings and enable the application, saving a great amount of time and effort.

COM Port Grouping
The NPort® 5200A’s COM Grouping function allows you to create a COM Group and redirect data from it to several physical COM ports on NPort device servers. With COM Grouping, you will be able to control multiple physical serial ports simultaneously by operating only one COM port.

Design

Materiaal behuizing Metaal
Kleur van het product Zwart

Technische details

RS-232 signalen CTS, DCD, DSR, DTR, GND, RTS, Rx, Tx
Datastroombeheer Ja
Seriële poort(en) 2
Isolatie 1,5 kV
Ethernet LAN, data-overdrachtsnelheden 10,100 Mbit/s
Soort serieële aansluiting RS-422/485
RS-422 signalen GND, RxD+, RxD-, TxD+, TxD-
RS-485 signalen Data+, Data-, GND, RxD+, RxD-, TxD+, TxD-
Auto MDI/MDI-X Ja
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
Mean time between failures (MTBF) 847750 uur
Flow Control type RTS/CTS, XON/XOFF

Certificaten

Veiligheid UL 60950-1

Gewicht en omvang

Afmetingen (BxDxH) 77 x 111 x 26 mm
Gewicht 340 g

Poorten & interfaces

Bekabelingstechnologie 10/100Base-T(X)
Aantal Ethernet LAN (RJ-45)-poorten 1

Energie

Ingangsspanning 12 - 48

Eisen aan de omgeving

Luchtvochtigheid bij opslag 5 - 95 procent
Temperatuur bij opslag -40 - 75 °C
Temperatuur, in bedrijf 0 - 60 °C

Protocollen

Ondersteunde netwerkprotocollen ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, IGMP V1/2, ARP

Schrijf uw eigen review

Alleen geregistreerde klanten van Beat-it.nl kunnen een review schrijven. U kunt zich hier inloggen of uzelf als klant registreren.

  Loading...