Main image
Click to view image in fullscreen
![]()
Inter-Tech S-3901 Impulse Tower Zwart
S-3901 Impulse – RGB meets Design
Are you looking for a special case, that moves your lighting concept into new spheres? Then the S-3901 Impulse is just right for you!
A slightly tinted Tempered Glass side panel and two RGB LED strips, which run over the front panel and the whole top of the case, make the S-3901 the ideal candidate for a high-end system with elaborate LED lighting. This is not only due to the standard 120mm RGB LED fan, that is installed on the rear panel, but also because of the digital 5V RGB control board, which accommodates up to 7 additional RGB fans, which are managed via the RGB motherboard control header. Space for up to four additional 3-pin fans round off the connection variety of the integrated circuit board.
In the top of the case are, in addition to the LED strips, fixed dust filter inserts and the controls. In addition tot wo USB 2.0 and USB 3.0 ports and HD audio jacks, there is a slider to set the fan speed (Off/Low/High) and a switch for manually switching through the LED effects. Another removable dust filter under the power supply and a variety of ways to lay the cables, complete the offer.
Are you looking for a special case, that moves your lighting concept into new spheres? Then the S-3901 Impulse is just right for you!
A slightly tinted Tempered Glass side panel and two RGB LED strips, which run over the front panel and the whole top of the case, make the S-3901 the ideal candidate for a high-end system with elaborate LED lighting. This is not only due to the standard 120mm RGB LED fan, that is installed on the rear panel, but also because of the digital 5V RGB control board, which accommodates up to 7 additional RGB fans, which are managed via the RGB motherboard control header. Space for up to four additional 3-pin fans round off the connection variety of the integrated circuit board.
In the top of the case are, in addition to the LED strips, fixed dust filter inserts and the controls. In addition tot wo USB 2.0 and USB 3.0 ports and HD audio jacks, there is a slider to set the fan speed (Off/Low/High) and a switch for manually switching through the LED effects. Another removable dust filter under the power supply and a variety of ways to lay the cables, complete the offer.
- RGB control board (allows effects like running light or rainbow)
- 3pin RGB header connector for digital 5V RGB motherboard control
- Includes two RGB LED strips and a 120mm RGB fan
- Side panel made of Tempered Glass
Disclaimer
Beat-it.nl is niet verantwoordelijk voor eventuele fouten in de documentatie van producten.
Specificaties
Design
Vormfactor*
Tower
Soort*
PC
Kleur van het product*
Zwart
Supported motherboard form factors*
ATX, ITX, micro ATX
Aantal 3.5" bays*
2
Aantal 2.5" bays
2
Aantal interne 3.5" baaien
2
Zijraam
Ja
Geschikt voor
Gamen
Belichting
Ja
Kleur van de verlichting
Multi
Geharde glaspla(a)t(en)
Ja
Maximum CPU cooler hoogte
17,5 cm
Maximum grafische kaart lengte
27,5 cm
Power voorraad
Vermogenstoevoer inclusief*
Nee
Poorten & interfaces
Audio-ingangen
Ja
Audio-uitgang
Ja
Aantal USB 2.0-poorten*
2
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A*
2
Koeling
Maximale aantal ventilators voorkant
3
Koeling
Voorste ventilators ondersteunende diameters
120,140 mm
Geïnstalleerde ventilators achterkant
1x 120 mm
Maximaal aantal ventilators achterkant
1
Maximaal aantal ventilators bovenkant
2
Bovenste ventilators ondersteunende diameters
120,140 mm
Opslagmedia
Ondersteunde HDD-groottes*
2.5,3.5"
Inhoud van de verpakking
Gebruikershandleiding
Ja
Gewicht en omvang
Breedte
215 mm
Diepte
455 mm
Hoogte
505 mm
Gewicht
6,78 kg
Verpakking
Breedte verpakking
290 mm
Diepte verpakking
540 mm
Hoogte verpakking
525 mm
Gewicht verpakking
8,04 kg
Logistieke gegevens
Code geharmoniseerd systeem (HS)
84733080
Producten per pallet
24 stuk(s)
Disclaimer
Beat-it.nl is niet verantwoordelijk voor eventuele fouten in de documentatie van producten.